Panel Beating Tools

Sykes Pickavant 058500TH – Thatcham-Accredited Body Repair Kit Upgrade your body shop kit with the first-ever Thatcham‑accredited body repair toolset - certified for insurance-approved bodywork. Ideal for apprentices, this comprehensive 13-piece collection equips you with precision tools housed in a durable steel toolbox. Key Features & Benefits Industry-Recognised AssuranceThe inaugural body repair kit to earn full Thatcham accreditation, ensuring compliance with the highest insurance standards. Thorough and Versatile 13‑Piece SetIncludes everything needed for panel beating and precision finishing: Four panel-beater hammers: 052900V2 - Straight Pein and Finish Flat Face 053000V2 - Pick and Finishing Flat Face 053700V2 - Pein and Finish Crowned Face 056900V2 - Flat Face and Shrinking Face Three dollies: 054301V2 - Thin Curved 054801V2 - Thin Toe 055201V2 - Utility Dolly Pry & surfacing tool 05730000 - Pry & Surfacing Spoon Bumping Tool 05940000 - Bumping Tool - Flat Adjustable Body Blade Holder plus three blades: 05710100 Holder  05711100 - 9tpi Standard Cut Body Blade 05711200 - 12tpi Fine Cut Body Blade 05711500 - 6tpi Plasticut Body Blade Built ToughSupplied in a robust steel toolbox 52700000 this kit is built to endure the demands of daily workshop use Why It's an Essential Addition Crafted for Apprentices and Professionals AlikeWith diverse tools in one kit, it's perfect for developing skills or tackling professional-level repairs efficiently. Insurance CompliantThe Thatcham accreditation ensures the kit meets criteria for insurance-accepted body repair workflows, instilling confidence in quality and standards.

Read more less

High quality investment casting alloy steel heads with hardened striking surfaces Fine quality octagonal wooden shafts fitted as standard Wood and steel wedged handles ensure maximum head retention with improved safety The heads have a tapered centre allowing the shaft to expand into the head & are secured with a double wedge Shrinking Hammers: Useful in the final stages of panel finishing when slightly stretched areas of metal can be encountered. In using this type of beater, small amounts of metal are forced into the spaces created by the cross milling. They can also be used on cold aluminium but working on sheet steel will be quicker if heat is applied to the area. Whenever possible, such beating should be carried out on the inside of the panel to minimise resurfacing needed prior to painting. Sykes-Pickavant does not recommend using the same individual tools on aluminium and steel. Panel Beater Double Ended Shrinking Hammer 05280000 Medium-weight, flat face shrinking hammer, specifically designed for panel beating on slightly stretched areas of metal Specially designed cross milled heads improves stretched areas by forcing small amounts of metal into spaces created by cross milling Round Face: 41mm Square Face: 38m Head Width: 97mm Weight: 0.425kg Replacement shafts available 05602000

Read more less

High quality investment casting alloy steel heads with hardened striking surfaces Fine quality octagonal wooden shafts fitted as standard Wood and steel wedged handles ensure maximum head retention with improved safety The heads have a tapered centre allowing the shaft to expand into the head & are secured with a double wedge Flat Faced Hammers: Traditional flat faced hammers are designed to construct or reconstruct sheet metal vehicle components, as well as for the removal of small imperfections in sheet metal surfaces. The flat surface minimises distortion and limits the stretching effect of the hammer blow. Flat surface hammers require a high degree of precision so as not to crease the metal surface.   Medium-weight, flat face finishing panel beater with straight pein Round Face: 41mm Head Width: 130mm Weight: 0.425kg Replacement shafts available 05602000  

Read more less

High quality investment casting alloy steel heads with hardened striking surfaces Fine quality octagonal wooden shafts fitted as standard Wood and steel wedged handles ensure maximum head retention with improved safety The heads have a tapered centre allowing the shaft to expand into the head & are secured with a double wedge Flat Faced Hammers Traditional flat faced hammers are designed to construct or reconstruct sheet metal vehicle components, as well as for the removal of small imperfections in sheet metal surfaces. The flat surface minimises distortion and limits the stretching effect of the hammer blow. Flat surface hammers require a high degree of precision so as not to crease the metal surface. Medium-weight flat face panel beater with round point pick head designed to remove low spots when finishing Round Face: 38mm Head Width: 135mm Weight: 0.43kg Replacement shafts available 05602000

Read more less

High quality investment casting alloy steel heads with hardened striking surfaces Fine quality octagonal wooden shafts fitted as standard Wood and steel wedged handles ensure maximum head retention with improved safety The heads have a tapered centre allowing the shaft to expand into the head & are secured with a double wedge Crowned Faced Hammers: Crowned faced hammers are used for the same general purposes as flat faced hammers but are less likely to cause a crease if the hammer blow is not precise.The crowned face does however, produce more marked stretching around the impact area. Medium-weight, crowned face finishing panel beater with curved pein for use where access is restricted Round Face: 41mm Head Width: 142mm Weight: 0.425kg Replacement shafts available 05602000

Read more less

High quality investment casting alloy steel heads with hardened striking surfaces Fine quality octagonal wooden shafts fitted as standard Wood and steel wedged handles ensure maximum head retention with improved safety The heads have a tapered centre allowing the shaft to expand into the head & are secured with a double wedge Flat Faced Hammers: Traditional flat faced hammers are designed to construct or reconstruct sheet metal vehicle components, as well as for the removal of small imperfections in sheet metal surfaces. The flat surface minimises distortion and limits the stretching effect of the hammer blow. Flat surface hammers require a high degree of precision so as not to crease the metal surface. Medium-weight, flat face panel beater suitable for straightening thicker gauge metals where significant corrective force is required Round Face: 41mm Square Face: 38mm Head Width: 97mm Weight: 0.425kg Replacement shafts available 05602000

Read more less

High quality investment casting alloy steel heads with hardened striking surfaces Fine quality octagonal wooden shafts fitted as standard Wood and steel wedged handles ensure maximum head retention with improved safety The heads have a tapered centre allowing the shaft to expand into the head & are secured with a double wedge Crowned Faced Hammers: Crowned faced hammers are used for the same general purposes as flat faced hammers but are less likely to cause a crease if the hammer blow is not precise. The crowned face does however, produce more marked stretching around the impact area. Medium-weight, crowned face panel beater suitable for straightening thicker gauge metals where significant corrective force is required Round Face: 41mm Square Face: 38mm Head Width: 97mm Weight: 0.425kg Replacement shafts available 05602000

Read more less

High quality alloy steel heads with hardened striking surfacesFine quality octagonal wooden shafts fitted as standardWood and steel wedged handles ensure maximum head retention with improved safetyThe heads have a tapered centre allowing the shaft to expand into the head & are secured with a double wedgeCrowned Faced HammersCrowned faced hammers are used for the same general purposes as flat faced hammers but are less likely to cause a crease if the hammer blow is not precise. The crowned face does however, produce more marked stretching around the impact area. Light-weight, crowned face panel beater suitable for applying measured force in area of light damage or on thinner gauge metal Round Face: 32mm Square Face: 25mm Head Width: 89mm Weight: 0.37kg Replacement shafts available 05602000

Read more less

High quality investment casting alloy steel heads with hardened striking surfaces Fine quality octagonal wooden shafts fitted as standard Wood and steel wedged handles ensure maximum head retention with improved safety The heads have a tapered centre allowing the shaft to expand into the head & are secured with a double wedge Crowned Faced Hammers: Crowned faced hammers are used for the same general purposes as flat faced hammers but are less likely to cause a crease if the hammer blow is not precise. The crowned face does however, produce more marked stretching around the impact area. Medium-weight, crowned face finishing panel beater with straight pein Round Face: 41mm Head Width: 130mm Weight: 0.425kg Replacement shafts available 05602000

Read more less

High quality investment casting alloy steel heads with hardened striking surfaces Fine quality octagonal wooden shafts fitted as standard Wood and steel wedged handles ensure maximum head retention with improved safety The heads have a tapered centre allowing the shaft to expand into the head & are secured with a double wedge Crowned Faced Hammers: Crowned faced hammers are used for the same general purposes as flat faced hammers but are less likely to cause a crease if the hammer blow is not precise. The crowned face does however, produce more marked stretching around the impact area.   Medium-weight crowned face panel beater with round point pick head designed to remove low spots when finishing Round Face: 38mm Head Width: 135mm Weight: 0.43kg Replacement shafts available 05602000

Read more less

High quality investment casting alloy steel heads with hardened striking surfaces Fine quality octagonal wooden shafts fitted as standard Wood and steel wedged handles ensure maximum head retention with improved safety The heads have a tapered centre allowing the shaft to expand into the head & are secured with a double wedge Flat Faced Hammers Traditional flat faced hammers are designed to construct or reconstruct sheet metal vehicle components, as well as for the removal of small imperfections in sheet metal surfaces. The flat surface minimises distortion and limits the stretching effect of the hammer blow. Flat surface hammers require a high degree of precision so as not to crease the metal surface. Light-weight, flat face panel beater suitable for applying measured force in areas of light damage or on thinner gauge metal Round Face: 32mm Square Face: 25mm Head Width: 89mm Weight: 0.37kg Replacement shafts available 05602000

Read more less

High quality investment casting alloy steel heads with hardened striking surfaces Fine quality octagonal wooden shafts fitted as standard Wood and steel wedged handles ensure maximum head retention with improved safety The heads have a tapered centre allowing the shaft to expand into the head & are secured with a double wedge Flat Faced Hammers: Traditional flat faced hammers are designed to construct or reconstruct sheet metal vehicle components, as well as for the removal of small imperfections in sheet metal surfaces. The flat surface minimises distortion and limits the stretching effect of the hammer blow. Flat surface hammers require a high degree of precision so as not to crease the metal surface.   Medium-weight flat face shrinking hammer, specifically designed for panel beating on slightly stretched areas of metal Twin head with 1 x round flat face and 1 x square, cross milled face Round Face: 41mm Square Face: 38mm Head Width: 97mm Weight: 0.425kg Replacement shafts available 05602000

Read more less

Ideal for assembly and maintenance applications Composite Handle

Read more less

Ideal for light assembly applications Comfortable anti-slip grip

Read more less

Replacement Hammer Shaft Suitable for Sykes Pickavant Panel Beating Hammers  

Read more less

Heavy duty club hammer with ash handle Conical Wedging Length: 260mm

Read more less

Heavy duty club hammer with ash handle Conical Wedging Length: 260mm

Read more less

This innovative panel gap gauge set includes three colour-coded pairs of gauges, each equipped with suction pads and flexible arms for precise, hands free application. Designed with soft rubber and plastic materials, they ensure accurate measurements without scratching or damaging surfaces. Features: Suction pads for easy alignment Flexible arms for versatile positioning Soft, Non Marking Materials to protect painted surfaces Colour Coded Gauges for easy identification and matching Measurement Range 1-10mm

Read more less